Filter
Top Products
IV - 69
Section 4 - Appendix B - Application Considerations
OKI OkiLAN 6120e User’s Guide
TCP/IP
h) Allow anyone to cancel requests. Check if
desired.
i) Remote printer is on a BSD system. Check this
box.
Tells the HP-UX system that it is communicating
with a Berkeley style remote printer (such as
LPD).
5. Select the OK button. A status window will outline
the tasks performed to install the queue. When you
see the message task completed, select OK.
6. Pull down the Lists menu and select Exit.
7. Select the Exit SAM button.
8. Test printing to the OkiLAN 6120e with the
following command:
lp -d lj4 filename
Configuring HP-UX v10.xx for
Printing with the OkiLAN 6120e
This application note describes the configuration of the
printing system on the HP-UX ver. 10.xx of the UNIX
operating system. For clarity and brevity, the following
specific names will be used to represent general
devices or concepts.
• lj4 - The local queue name on the HP-UX system
to which print jobs will be directed. The print jobs
are destined for a printer attached to the OkiLAN
6120e.
• OKIPRINTER - The host name of the remote
system which is the OkiLAN 6120e. For example,
to telnet to the OkiLAN 6120e and invoke the
OkiLAN 6120e Configuration utility, you would
type telnet OKIPRINTER. A host name is not
required for the OkiLAN 6120e, the IP Address
may be used.