Filter
Top Products
VI - 3
Section 6 - Chapter 1 - OkiLAN 6120e Setup for Windows NT
OKI OkiLAN 6120e User’s Guide
Windows Printing
Chapter 1
OkiLAN 6120e Set Up for
Windows NT 4.0/2000
Overview
This section contains instruction and information on
how to set up your OkiLAN 6120e for a Windows NT
4.0/2000 environment. Print options for Windows NT
4.0/2000 include:
• OkiLAN 6120e Connect for IP
• OkiLAN 6120e Connect for DLC
• LPR
OkiLAN 6120e Connect for IP
OkiLAN 6120e Connect for TCP/IP is a full featured
utility that allows simple, direct, TCP/IP printing from
your computer to a printer attached to an OKI TCP/IP
enabled print server. OkiLAN 6120e Connect has
advantages over other TCP/IP printing options. It
allows you to print to print servers that are using
Dynamic IP addresses (DHCP). It will also notify you
immediately in the event of a printer error (e.g. Paper
out). Print jobs printed through OkiLAN 6120e
Connect are sent directly to the OkiLAN 6120e print
server and not routed through a network server,
resulting in a reduction of network traffic.
System Requirements
To use OkiLAN 6120e Connect for TCP/IP for your
Windows NT 4.0/2000 operating system, your
computer must be configured to run TCP/IP. The
OkiLAN 6120e print server must also be configured to
run TCP/IP.