Filter
Top Products
Maintenance
130
+ Insert chip card (supplied with the toner cartridge) into the card reader
ensuring that the chip is entered as shown in the drawing below.
+ The following is displayed on the scanner control panel screen:
+ Press OK.
+ Once the chip card has been read, the display shows:
+ Remove the card.
Caution - If the following is displayed, check that you have inserted the chip card
the right way up:
Caution - If the following is displayed, get out your card and insert it in the other
way up, following the green arrow.
CHANGE TONER ?
YES= OK - NO= C
TONER OK
REMOVE CARD
CANNOT READ CARD
REMOVE CARD
CANNOT READ CARD
CHECK WAY UP
Green Arrow