Filter
Top Products
75
Operation
Remark : Since the addressee’s number is generally on the document to be trans-
mitted, you may also dial before positioning the document.
From the flat scanner
CHOOSING THE RESOLUTION/CONTRAST
Resolution
You have 4 modes for document transmission.
The mode choice depends on the type of document to be
transmitted:
• Normal mode, to be used for good quality documents, without drawings
or small details
• Fine mode, symbolised by Fine at the bottom of the display screen. To
be used for documents with drawings or small characters
• Super Fine mode, symbolised by SFine at the bottom of the display
screen. To be used for documents with very fine or small character
drawings
• Photo mode symbolised by Photo at the bottom of the display screen.
To be used for photographic documents
To select the resolution mode:
+ Press key as many times as necessary to select the required
mode. A
icon on the screen shows the current mode.
Contrast
You can set the contrast if your document is too light or too dark. If
the document is light, you must raise the contrast and if it is dark,
you must reduce it.
To set the contrast:
+ Using the handle, lift up the
document feeder tray.
+ Put your document, with the
printed face down on the scanner
window (1). The scanner origin is
located at your end, to the left,
as shown opposite.
+ Once the operation is complete,
lift the document feeder tray and
recover your document.
1