Filter
Top Products
135
Maintenance
+ Press the OK key on the scanner control panel. The display shows:
+ Insert the gauge card (supplied with the drum cartridge) into the card reader
ensuring that the chip is entered as shown in the drawing below.
+ The following is displayed on the scanner control panel screen:
+ Press OK.
+ Once the chip card has been read, the display shows:
+ Remove the card.
Caution - If the following is displayed, check that you have inserted the chip card
the right way up:
Caution - If the following is displayed, take out your card and insert it in the other
way up.
TUE 02 APR 13:39
INSERT GAUGE
CARD
CHANGE DRUM ?
YES= OK - NO= C
DRUM OK
REMOVE CARD
CANNOT READ CARD
REMOVE CARD
CANNOT READ CARD
CHECK WAY UP
Green Arrow