Filter
Top Products
41
Setting your terminal
To select the network:
202 OK - SETUP / GEOGRAPHICAL / NETWORK
+ Select the required option and press the OK key to confirm.
Language
This setting enables you to choose a language other than that
imposed by the Country setting.
To select the language:
203 OK - SETUP / GEOGRAPHICAL / LANGUAGE
+ Select the required option and press the OK key to confirm.
Local prefix
This function is used when your fax is installed with a private
network, behind a company’s PABX. It allows you to program an
additional automatic local prefix (to be defined), enabling you to
automatically exit the company’s telephone network system, but
only under certain conditions:
• the company’s internal numbers, where a prefix is not required,
must be short numbers less than the minimal size (to be defined,
for example France has 10 digits),
• the outside numbers requiring a prefix, must be long numbers
greater or equal to the minimal size (to be defined, for example
France has 10 digits).
Programming your fax with the local prefix consists of two steps:
• defining the minimal size (or equal) of the company’s outside
numbers,
• defining the outgoing local prefix of the company’s telephone
network. This prefix will automatically be added as soon as an
external number is dialed.
Caution - If you define a local prefix, do not add it to the
numbers stored in the directory, it will be automatically
dialed with each number.
Prefix
252 OK - SETUP / NETWORKS / PREFIX
Defining the minimal size
2521 OK - SETUP / NETWORKS / PREFIX / SIZE
NUMBER
+ You can change the default value for the minimal size of the
company’s outside numbers and validate with OK. The minimal
size will range between 1 and 30.