Filter
Top Products
7
OKIPAGE
6e
The following recycled paper has been tested and approved
for use in OKIDATA printers.
• Weyerhaeuser, Lynx Opaque, 20% PCW, 20lb., 28 lb. and Laser
Copy, 20 lb.
• Union Camp Great White (Laser), 25% PCW, 20lb., 24lb.
• International Paper, Beckett Division, Enhanced Marble, 50%
Recycled, 20% PCW, 24lb.
• International Paper, Hammermill Division, Savings DP, 20%
PCW, 20 lb.
• Georgia Pacific, GeoCycle, 20% PCW, 20lb.
• James River, WordPro Laser, 20% PCW, 20lb., 24lb.
• Warren, SpectraTech, Gloss and Matte, 10% PCW, 28lb., 32lb.
• Cross Pointe, Worx, 50% Recycled, 20% PCW
• Strathmore, Script Bright White Wove, 50% Recycled
Choosing Paper
• Use a paper weight of 16 to 24 lb. in the
Paper Tray and 16 to 32 lb. for manual feed.
• For best results, use paper that is smooth and of
high quality, such as copier paper or paper
with a Sheffield rating of 250 or less.
• Store paper in its ream wrapper until you are
ready to use it. Keep it away from moisture or
other conditions that can cause it to wrinkle
or curl.
• Preprinted forms must not scorch, melt, offset,
or release hazardous emissions when heated
to 392°F (200° C) for 0.1 second.
• Avoid printing on both sides of the paper for
more than a few pages, or on preprinted
documents that have been in a photocopier.
• Try paper before you buy it in quantity.
Using Recycled Print Media
Recycled paper should be restricted to 20% to 35% Post
Consumer Content and not exceed 50%. Paper must be
relatively stiff and have minimum edge curl. Paper
should be white and bright for maximum
contrast. The surface should be smooth, clean, and stable
electrically and dimensionally.
Recycled paper used by OKIDATA printers must be
specifically denoted by the paper manufacturer to be for laser
printers, or laser guaranteed or compatible. Using media
outside these specifications may cause problems requiring
service that will not be covered by OKIDATA warranty or
service agreements.