Filter
Top Products
MATERIAL SAFETY DATA SHEET
OL “e” Series Toner
MSDS # 58093101
For more information, contact Okidata at:
532 Fellowship Road
Mount Laurel, NJ 08054
Emergency Information: 1-800-OKIDATA
EMERGENCY FIRST AID PROCEDURES
Emergency
Procedure
Toner Dilute by giving two glasses of
swallowed water and induce vomiting by
(ingested) administering Syrup of Ipecac (follow
manufacturer’s instructions). Seek medical
attention.
NEVER give anything by mouth or attempt
to induce vomiting in a person who is unconscious.
Toner Remove person to fresh air.
inhaled Seek medical attention.
Toner gets Flush eyes with large quantities of cool
in the eyes water for 15 minutes, keeping the eyelids
open with fingers. Seek medical attention.
Note Small amounts of toner on skin or clothing
can easily be removed with soap and cold water. Hot
water makes toner harder to remove.
Hazardous Ingredients
Styrene-Butyl Acrylate Copolymer (91% by weight)
CAS# 25767-47-9
OSHA TWA 15 mg/m3 for total dust
ACGIH TLV 10 mg/m3 for total dust
Carbon Black (5-7% by weight)
CAS# 1333-86-4
OSHA TWA 3.5 mg/m3
ACGIH TLV 3.5 mg/m3
Polypropylene (less than 3% by weight)
CAS# 9003-07-0
OSHA TWA 15 mg/m3 for total dust
ACGIH TLV 10 mg/m3 for total dust
Amorphous Fumed Silica (less than 1% by weight)
CAS# 67762-90-7
OSHA PEL 15.0 mg/m3 for total dust
ACGIH TLV 10.0 mg/m3 for total dust
Note This product is not regulated under Section 313 of SARA, Title III.
Physical Data
Melting Point: 110°C (230°F)
Boiling Point: Not applicable
Vapor Pressure: Not applicable
Vapor Density (Air=1): Not applicable
Evaporation Rate (Butyl Acetate=1): Not applicable
Specific Gravity (H2O=1): 1.15
Solubility in water: Negligible
Appearance and odor: Black granules, no odor