Filter
Top Products
178
8
EN
Troubleshooting
Symptom Probable cause Action
Nothing appears on
the display
The battery is not loaded properly.
Check the direction of the battery
(☞ P.22).
Battery power is getting low.
Charge the battery (☞ P.22 to P.26).
The power is off.
Turn the power on (☞ P.27).
W
o
n’t start
Battery power is getting low.
Replace with new battery (☞ P.22 to
P.26).
The power is off.
Turn the power on (☞ P.27).
The recorder is in HOLD mode.
Release the recorder from HOLD (☞ P.28).
Unable to record
Low remaining memory.
Erase unnecessary files (☞ P.61).
The maximum number of files has
been reached.
Change to the another folder
(☞ P.33 to P.39).
N
o
playback tone
heard
The earphone is connected.
Unplug the earphones to use the
internal speaker.
The volume level is set to [00].
Adjust the volume level (☞ P.47).
The recording level has not been
adjusted.
Adjust the recording level and then try
recording once more (☞ P.68).
R
e
cording level too
low
The microphone sensitivity is too low.
Set the microphone sensitivity to [High]
or [Middle] mode and try again (☞ P.68).
This could potentially be because
the output level for the connected
external devices are too low.
Adjust the output level for the
connected devices.
Message Meaning Explanation Action
[Please Select The
File]
Unselected File File is not selected.
Please select a file then
carry out the operation
(☞ P.54 to P.60).
[
Same folder. Can't be
moved(copied).]
File cannot be moved
(copied).
Attempting to move (copy)
into the same folder.
Please select another
folder.
[S
ame files. Can't be
moved(copied).]
File cannot be moved
(copied).
File in the destination
with the same name, or
file with DRM.
Please select another file.
[T
his file can't be
divided.]
File which cannot be split.
Attempting to split a file
besides the PCM files
recorded in this recorder.
Please select another file.
Alarm message list/Troubleshooting
Alarm message list/
Troubleshooting