Filter
Top Products
81
3
EN
Menu setting method
Menu setting method
Characters
You can change the setting of the display
character to match the character code of the
text file stored in the [TEXT] folder. In order to
have the recorder read out the text file created
in diverse environments, change the character
code if necessary.
1 From the [
Home
] menu display
select [
Audiobooks
], and then
press the
`
OK
or 9 button.
2 In the Book list display, press the
F3 (MENU)
button.
Text Language
You can change the language for reading
out the text files stored in the [TEXT] folder.
1 From the [
Home
] menu display
select [
Audiobooks
], and then
press the
`
OK
or 9 button.
2 In the Book list display, press the
F3 (MENU)
button.
3 Press the
+
or
−
button to select
[
Book Menu
], and then press the
`
OK
or 9 button.
4 Press the
+
or
−
button to select
[
Text Language
], and then press
the
`
OK
or 9 button.
5 Set the Language.
[English] [Français] [Español]:
Notes
•
When the [LCD/Sound Menu] – [Voice
Guide] setting (☞ P
.87) is set to [On], the
[Text L
anguage] setting cannot be changed.
Set the [Voice G
uide] setting to [O], and
then specify the [Te
xt Language] setting.
• When the [Voice Guide] setting (☞ P.87)
is [On], the language for reading out text
les will be the same as that set for the
voice guidance in [T
e
xt Language].
Skip mode list:
[Section]
(Level1~6)
Denotes chapters, sec-
tions, paragraphs, etc. in
DAISY contents.
Example: [Level 1] is equiv-
alent to chapters, [Level 2]
is equivalent to sections,
and [Level 3] is equivalent
to paragraphs.
[Group]
A portion within a section is
called a group. Groups are
sometimes set for the be-
ginning and end of diagram
explanations.
[Page]
Equivalent to the page
of book.
[Phrase]
When reading a text aloud,
a breathing interval is
created at the punctuation
between sentences. The
audio between this inter-
val and the next interval is
called a “phrase”.
[Bookmark]
Indicates a location where
an index mark (bookmark)
is set.
Note
• Depending on the DAISY contents, there
a
re cases where there is no location
corresponding to a dividing interval.
3 Press the
+
or
−
button to select
[
Book Menu
], and then press the
`
OK
or 9 button.
4 Press the
+
or
−
button to select
[
Characters
], and then press the
`
OK
or 9 button.
5 Select the [
ANSI
], [
UTF-8
] or [
UTF-
16
].