Filter
Top Products
78
3
EN
Menu setting method
Auto Power Off
If the recorder remains in stop mode for over
10 minutes (Initial setting), the power will be
turned off.
1 Select [
Auto Power Off
] from the
menu on the [
System Menu
].
Time & Date
Refer to “Setting time and date [Time &
D
ate]” (☞ P
.29).
USB Settings
Refer to “Changing the USB Class [USB
Settings]” (☞ P
.96).
System Standby
The system standby mode allows you to
switch off the display without turning off the
power, while the recorder is not operated.
1 Select [
System Standby
] from the
menu on the [
System Menu
].
2 Select the [
On
] or [
Off
].
[On]:
System standby will be set.
[Off]:
D
isables this function.
• To restart from system standby, set the
POWER/HOLD switch to on. The recorder
quickly recovers from system standby.
Notes
•
The recorder uses battery power in system
s
tandby, so be aware of the remaining
battery level.
•
W
hen [Auto Power O] is not set to [O],
and [System Standby] i
s set to [On], the
recorder automatically enters system
standby mode when the specied time for
[A
uto Power O] i
s reached.
• System standby mode is eective for
a maximum of 24 hours. When the
maximum time is exceeded, the recorder
automatically turns o.
2 Select the [
5minutes
], [
10minutes
],
[
30minutes
], [
1hour
], [
2hour
],
[
3hour
] or [
Off
].
[5minutes] [10minutes] [30minutes]
[1hour] [2hour] [3hour]:
S
et the length of time before the
power will be turned off.
[Off]: Disables this function.
Reset Settings
This returns the functions back to their initial
settings (factory default).
1 Select [
Reset Settings
] from the
menu on the [
System Menu
].
2 Press the
+
button to select
[
Start
], and then press the `
OK
button.
[Start]:
Returns the settings to their initial values.
[Cancel]:
Ta
kes you back to the [System Menu].
Menu settings after setting reset
(initial settings):
Rec Menu:
[Mic Sense] [Middle]
[Rec Mode]
[Recording format]
[WMA]
[Recording rate] [ST XQ]
Menu setting method