Filter
Top Products
PROGRAMMING YOUR MACHINE
PROGRAMMING
YOUR MACHINE
53
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
001 CONTRAST 1 Lighter Setting the home position for the CONTRAST.
*4 Normal
7Darker
002 RESOLUTION 1 Standard Setting the home position for the RESOLUTION.
*2 Fine
3S-Fine
003 ORIGINAL *1 Text Setting the home position for the ORIGINAL.
2 Text/Photo
3 Photo
004 STAMP *1 Off Setting the home position of the STAMP.
To select the stamp function when the document is stored in
memory, see Fax Parameter No. 028.
2On
005 MEMORY 1 Off Setting the home position for the MEMORY.
*2 On
006 DIALING METHOD 1 Pulse Selecting the dialing method.
(Select Line-1 or Line-2 first, if you have the 2nd G3 Fax
Communication Port Kit installed)
*2 Tone
007 HEADER PRINT *1 Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside: Outside TX copy area.
No print: Header does not print.
2 Outside
3 No print
008 HEADER FORMAT *1 Logo, ID No. Selecting the header format.
2 From To
009 RCV'D TIME PRINT *1 Invalid Selecting whether the machine prints the received date & time,
remote ID, percentage of reduction and page number on the
bottom of each received document.
2 Valid
010 KEY/BUZZER VOLUME 1 Off Selecting the volume of the Key/Buzzer tone.
*2 Soft
3 Medium
4 Loud
012 COMM. JOURNAL 1 Off Selecting the home position for the printing mode of the COMM.
Journal Off/Always/Inc. Only
Off : Does not print
Always : Always prints
Inc. Only: Prints only when communication has failed.
2 Always
*3 Inc. Only
013 AUTO JOURNAL PRINT 1 Invalid Selecting whether the machine prints the journal automatically
after every 100 transactions.
*2 Valid
014 FILE ACCEPTANCE
REPORT
*1 Invalid Selecting whether the machine prints the file acceptance journal.
If you set this parameter to Valid, a report will print after the
document is stored into memory.
2 Valid
Customizing Your Machine
Continued on the next page...