Filter
Top Products
BASIC OPERATIONS
BASIC
OPERATIONS
69
To send with reduction, follow the steps below.
Repeat Steps 1 to 5, except in Step 3, set the "07 LEDGER EMAIL XMT" setting to "OFF" position.
When the Select Mode "07 LEDGER EMAIL XMT" setting is set to the "OFF" position, the transmission
reduction is according to the setting of Fax Parameter No. 141 (LAN XMT REDUCTION). (See the Table
below)
LEDGER EMAIL XMT = ON : Transmits actual document size (without reduction).
LEDGER EMAIL XMT = OFF: Reduces LEDGER size document to B4 size or to A4/Letter before
transmission. (According to the Fax Parameter No. 141 (LAN XMT
REDUCTION) setting, see Table below)
(see Note 1)
4
Make sure that the setting is on and press
.
Dial by any combination of the following methods:
• Manual Email Addressing press after each
station is entered. (Up to 70 stations)
• Phone Book Email Addressing. (Up to 200 stations)
5
The document(s) is stored memory with a file
number.
The machine then connects to the LAN and
transmits the Ledger size document(s).
(After the document(s) are sent, the "07 LEDGER
EMAIL XMT" Select Mode will automatically return
to the preset position (ON).)
Document Size Transmission
Document Size
LEDGER EMAIL XMT = ON
LEDGER EMAIL XMT = OFF
Fax Parameter No. 141
(LAN XMT REDUCTION)
set to "Invalid"
Fax Parameter No. 141
(LAN XMT REDUCTION)
set to "Valid"
LEDGER LEDGER B4 A4/Letter
B4 B4 B4 A4/Letter
A4/Letter A4/Letter A4/Letter A4/Letter
NOTE
1. Factory default setting for Fax Parameter No. 141 (LAN XMT REDUCTION) is "Invalid".
ON
OK
SET
MEMORY XMT STN(S):001
AMERICA
panasonic.usa@panasonic.com
AMERICA ASIA CHINA
AFRICA BERLIN
ANTARCTICA BRAZIL
APOLLO
JOB
STATUS
MEMORY XMT
KEYBOARD ORIGINAL
LIGHTER DARKER
CANADA
1/1
Email Email
Email Email
Email Email
Sending Documents via LAN