Filter
Top Products
PROGRAMMING YOUR MACHINE
56
Customizing Your Machine
088 LINE SELECTION
(See Note 4)
*1 Auto Setting the home position for the Telephone Line selection.
Auto :Selects the available telephone line for transmission
automatically.
Line 1
:Selects this as the default telephone line, unless manually
selecting an alternate phone line.
Line 2:Selects this as the default telephone line, unless manually
selecting an alternate phone line.
2 Line 1
3 Line 2
089 LIST OUTPUT TRAY *1 Inner 1 Selecting the Output Tray home position for List printout.
Inner 1 : The List printout exits to the Bottom Output Tray.
Inner 2 : The List printout exits to the Upper Output Tray (Blue).
2 Inner 2
3 Outer
095 DUPLEX PRINT *1 Invalid Selecting whether the machine performs duplex print.
2Valid
097 SPECIAL TRAY
No. 1 - 3
*1 None Select up to 3 Special Trays that will not be used for printing
received faxes (4-Tray configuration). One Tray must always be
available for receiving faxes.
(You can specify one Tray (1 ~ 4) for each selection No. 1, No. 2
and/or No. 3)
2 Tray 1
3 Tray 2
4 Tray 3
5 Tray 4
099 MEMORY SIZE
(Flash Memory)
- - Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
140 LAN RELAY XMT
REQUEST
*1 Invalid Selecting whether the machine performs LAN Relay XMT
Request.
2Valid
141 LAN XMT REDUCTION
*1 Invalid
Selecting whether to automatically reduce from LEDGER / B4 to
A4, when LEDGER / B4 documents are transmitted via LAN.
Invalid: No reduction
Valid : Automatic reduction from LEDGER / B4 to A4
2Valid
142 RELAY XMT
(a.k.a. LAN RELAY
STATION on UF-770i)
1 Invalid Selecting whether the machine accepts and performs G3 relayed
transmission. (Relay Station Functions)
*2 Valid
143 RELAY XMT REPORT
1Off
Setting how the COMM. Journal for relayed transmission is sent to
the originator.
Off :Don’t send.
Always : Always send.
Inc. Only: Send only if communication has failed.
*2 Always
3Inc. Only
144 EMAIL CHARACTER
SET
1 Japanese Selecting the Character Set when receiving or sending email text.
*2 English
145 SENDER SELECTION *1 Invalid Selecting a pre-programmed sender’s name and email address
before each transmission. (See page 83)
2Valid
146 POP TIMER -- 0 to 60 min. Setting the time interval for the machine to check for email on the
POP Server.
(0 = Does not check the POP Server for email. )
3 *3 min.
147 AUTO POP RCV 1 Invalid Selecting whether the machine automatically downloads an email
from the POP Server.
*2 Valid
148 DELETE POP RCV
EMAIL
1 Invalid Selecting whether the email will be deleted automatically after
retrieval from the POP Server.
*2 Valid
No. Parameter
Setting
Number
Setting Comments