Filter
Top Products
18
9
Close the Setup Utility ( page 36)
You should set the “Coffee break Password” (Note that you must first set the User Password).
When you input your selected key combination, the computer locks (key input, use of the touch
pad and use of an external mouse are no longer possible).
+ +
Setting the Coffee break Password (enabling or disabling)
Do not leave your computer just after sensitive data had been shown on the screen.
It is impossible to lock your computer from an external device, such as a mouse
connected through the serial port.
During the coffee break, is displayed on the screen. If the operations de-
scribed below are performed during the coffee break, the indication may
disappear. In order to quit the coffee break and begin using the computer, input
your password.
If a different popup window is displayed by using the + or +
key combination.
If the computer is returned from the standby mode.
If the serial mouse is moved.
CAUTION
(Example of a selected key combination)
The computer
is locked
When leaving your desk
When an incorrect password is inputted,
Operation resumes
Operation does
not resume
You do not want your computer to be used without permission while away temporarily
Input the correct password used at startup
and press .
8
Press to end the password setting procedure
CAUTION
To prevent the changing of your password without permission
• When running the Setup Utility program, do not leave your computer even for a
short time.
• Set the User Password Protection option ( page 20).
When the coffee break password is set
1
Set the User Password ( page 17 step
1
to
7
), if it hasn’t already
2
To disable the Coffee break Password
Using and , select [Coffee break Password] then set [Disable] with .
Go to step
4
.
3
Using and keys, select [Key Combination for Coffee
break] then set your combination of keys with
To enable the Coffee break Password
Using and , select [Coffee break Password] then set [Enable] with .
Security Measures
Close the Setup Utility ( page 36)
4
Press to end the password setting procedure
5