Filter
Top Products
9
1
Open up the display
Starting Up/Shutting Down
Slide the latch as shown and lift open the display.
Starting Up
CAUTION
Do not slide the power switch repeatedly.
After you have turned your computer off, you must wait ten seconds before you
can turn it back on.
If the computer does not turn on when the power is switched on, the temperature of
the CPU has exceeded its normal operating temperature. In this case, a function
designed to prevent it from overheating is triggered automatically and prevents the
computer from turning on. Should this happen, allow the computer to cool down
then switch the power on again.
If the computer still does not turn on, please consult your nearest Panasonic dealer.
Move the power switch toward the rear direction and hold one second until the power
indicator ( ) goes on before releasing it.
2
Turn your computer on
If is displayed,
you must first enter your User Password ( page 17).
* If you are starting from the suspend mode ( page 10), if
after three attempts the correct password is not input, or if no
password is entered for about a minute, the computer returns
to the suspend mode.
NOTE
When an application or file that was previously displayed ap-
pears on your screen,
this means the suspend or hibernation mode ( page 10) has been set.
3
Select your application
You are able to start working on your computer.
Over three incorrect attempts,
If the correct password is input,
Will Start
Will Not Start*
(Power off)
If the display on the right appears,
the network password has been set.
To read and write data to other
computers, the correct password
must be entered.
Upon entering your
User Password and
pressing .
Latch
NOTE
Do not turn on the computer with the LCD panel closed if an external monitor is not
connected. The computer will not power on.