12
You may choose to protect the data on your computer from being accessed illegally or
overwritten accidentally by using a floppy disk. You can also set your computer to be
unbootable from a floppy disk.
Preventing the use of a floppy disk
Procedure
1
Run the Setup Utility ( page 34)
This error message is displayed when access to the
floppy disk drive is attempted.
Using and , select [Supervisor Setup], then press Enter
2
Using and , select [Boot Up Drive], then set either [HDD
FDD] or [CDD FDD HDD] with
3
4
Using the and , select [Floppy Operation], set [Disable]
with , then press Esc
5
When you do not want your Supervisor Setup changed without permission
Set the Supervisor Password. After it has been set, no changes can be made to the
Supervisor settings unless the password is entered.
When the supervisor password is set
When changing the Supervisor Setup,
if is displayed after the power has been
turned on, or if [Enter supervisor password] is
displayed in the Setup Utility ( page 34),
Supervisor Setup
May be
Opened
Supervisor Setup
Can not be
Opened
When the supervisor password is incorrect
or when the user password is entered, (Or,
even when the correct supervisor password
is entered). page 46
Input the correct supervisor password and
press .
(There are cases in which the Supervisor Setup does
not appear on the main screen).
page 34
Close the Setup Utility ( page 34)
Preventing theft of damage to data using a floppy disk
Security Measures
Enter