Filter
Top Products
15
Close the Setup Utility ( page 34)
6
1
Run the Setup Utility ( page 34)
3
Using and , select [Power Saving], then set [Advanced]
with
(To avoid setting the suspend/hibernation timeout, press Esc and proceed on
to step
6
.)
4
Using and , select [Sleep Switch], then set [Suspend] or
[Hibernation] with
5
Using and , select [Suspend/Hibernation Timeout], set
either [4 min] or [16 min] with , then press Esc
2
Setting Power Management
(How to set [Advanced] and the suspend/hibernation timeout)
Using and , select [Power Management], then press
Enter
Computing On the Road
If you plan to use only the battery pack or set the power management, it is neces-
sary to check [Allow Windows to manage power use on this computer] in [Start]
- [Settings] - [Control Panel] - [Power].
If the check is removed, the time may not be displayed properly when operation is
resumed from the suspend or hibernation mode or the operating time with the
battery pack may become short (the power management function of Windows
does not work).
NOTE