Filter
Top Products
9
Situation Function to use Reference
User Password below
Coffee break Password page 10
Prevent operation by
using a floppy disk
Supervisor Password page 12
Use security locks
CAUTION
Security Measures
You do not want your computer to be used without permission
Same as above, but while you’re away temporarily
You want to prevent theft or damage to data by using a floppy disk
You do not want your Supervisor Setup changed without permission
You want to prevent theft of your computer
To prevent unauthorized access of your computer, the various security measures are provided below.
1
2
Setting the user password (enabling, changing, disabling)
4
3
Your password will not be displayed on the screen.
Please limit your password to seven characters. Note that there is no
distinction between upper and lower case letters.
White colored keys can be used. Note that the space bar and function
keys cannot be used.
Do not input your password while holding down on Shift or Ctrl .
Use only the upper horizontal row of numeric keys to input your user
password.
Do not forget your password. If a password is forgotten, you will be
unable to use your computer. Please contact Panasonic Technical Sup-
port.
Run the Setup Utility ( page 34)
Using and , select [System Setup], then press Enter
Using and , select [User Password], then press Enter
To enable or change your password
Enter your password at the [Enter User Password], then press .
Set the User Password.
Without the password, access to your computer is impossible.
When the User Password is set
When you do not want your computer to be used without permission
* If you are starting from the suspend mode, if after
three attempts the correct password is not input,
or if no password is entered for about a minute,
the computer returns to the suspend mode.
Over three incorrect attempts,
If the correct password is input,
Will Start
Will Not Start*
(Power off)
Upon entering your User Pass-
word and pressing Enter .
"Names and Functions of Parts"
page 12
(To next page)