Filter
Top Products
2
CAUTION
CAUTION
Hold down the Fn key and press F2 to change the
brightness.
By pressing this key combination when the external
display is connected, you can select either an exter-
nal display, LCD or simultaneous. Powering the com-
puter off and then back on enables the display set-
ting of the Setup Utility.
Pressing this key combination turns off audio from
the internal speakers and headphone jack. Pressing
it again or restarting the computer turns audio back
on. Pressing it again, or powering the computer off
and then back on enables the speaker setting of the
Setup Utility.
Pressing this key combination adjusts the volume of
the internal speakers and headphone jack.
This key combination cannot be used to adjust
the volume of the warning beep.
A dull elongated sound may be heard while
adjusting the volume.
Pressing this key combination causes the current
screen on the display to be saved to memory, and
powers off the computer. When the computer is pow-
ered on again by sliding the power switch or press-
ing the sleep switch, this save screen will be displayed.
(The computer must be plugged into the AC adapter
or have a battery pack with sufficient remaining power
installed.)
Pressing this key combination temporarily disables
the power management feature of the Setup Utility.
Pressing it again, or powering the computer off and
then back on enables the power management set-
ting of the Setup Utility. page 16
Pressing this key combination displays the remain-
ing battery capacity on the screen. page 17
Pressing this key combination cuts off power to the
LCD and turns off the hard disk motor until operation
is resumed by pressing any key.
Key Combinations
Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the touch pad (mouse) or other keys.
LCD brightness control
Display change
Speakers on/off switch
Volume control
( down)
Volume control ( up)
Holding down on the keys
changes the sound level.
Power off using the
suspend function
Power management
enable/disable switch
Remaining capacity of
the battery pack
ECO mode for conserv-
ing power
Fn + F2
Fn + F3
Fn + F4
Fn + F5
Fn + F7
Fn + F8
Fn + F9
Fn + F
10
Fn + F6
When the bright-
ness is at its maxi-
mum value.
Key
Functions
Popup Window
ON
OFF
Enable
(Advanced)
Enable
(Standard)
Disable
(OFF)
Down
Up
When disabling the speakers with this key com-
bination, the warning beep is also disabled.
Remaining
capacity (%)
display
Battery pack is
not installed.
*
*
* When [Disable] is set for [Fn+F7/Fn+F10] with the Setup Utility, these key combinations become inoperable.
NOTE