Filter
Top Products
13
CAUTION
NOTE
Setting the Supervisor Password
(enabling, changing, disabling)
1
2
Run the Setup Utility ( page 34)
Using and , select [Supervisor Setup], then press Enter
3
Using and , select [Supervisor Password], then press
Enter
4
To enable or change your supervisor password
Enter your password at the [Enter Supervisor Password], then press .
Your password will not be displayed on the screen.
Please limit your password to seven characters. Note that there is no
distinction between upper and lower case letters.
White colored keys can be used. Note that the space bar and function
keys cannot be used.
Do not input your password while holding down on Shift or Ctrl .
Use only the upper horizontal row of numeric keys to input your user
password.
Do not forget your password. If a password is forgotten you will be
unable to use your computer. Please contact Panasonic Technical Sup-
port.
5
Re-enter your password at the [Enter Supervisor Password
Again]
(This is for confirmation purposes.)
Using and , select [Set Supervisor Password], then press
Enter
6
At the confirmation screen, press Enter
7
8
Press Esc to end the password setting procedure
9
Close the Setup Utility ( page 34)
When you do not want the User Password enabled, changed, or dis-
abled without permission,
use and , to select [User Password Protection], then set [Enable]
with .
Using
and
, select [Delete Supervisor Password], then press
Enter .
Go to step
7
.
To disable your supervisor password
Security Measures