Filter
Top Products
Panasonic Wireless Display Configuration Manual
6. Click [Next] - [OK] - [Next] - [OK] - [Finish] to exit out of the "Wireless Display Setup
Utility".
8. The Wireless Display is now updated with the new settings. Restart the Wireless
Display, press the MENU button on the display, then select [Wireless]. The current
settings of the Wireless Display are listed in this screen.
At this stage, the display can not establish
connection with the computer because the
display's settings have been changed.
The network adapter's profile must also
be changed to match with the display.
NOTE
General Wireless Battery Option Version
Network Type : Infrastructure
SSID : OfficeAP001
Channel :
TxRate mode : Fully Automatic
Encryption : 64bit
Rate (Tx/Rx) : /
Display IP : 10. 57.151.206
PC IP : 10. 57.151.205
Net Mask : 255. 0. 0. 0
AES Encryption : 128bit
84%
OK Cancel
IIIIII
IIIIII
III
Setup the Wireless Network Adapter to Infrastructure Mode:
9. Launch the Configuration Utility of the network
adapter. Select [Action] - [Add/Edit Configura-
tion Profile] - [Add]. The following window is dis-
played. [ P.5-(7~9)]
This screen is a sample.
10. Create a profile name in the "Profile Name" box.
Change the "Network Type" to [Access Point].
This screen is a sample.
11. Click [Next]. The following window is displayed.
In the "Network Name" box, enter the SSID of
the Access Point.
14