Filter
Top Products
Panasonic Wireless Display Configuration Manual
Infrastructure Mode Configuration
15
12. Click [Next]. The following window is displayed.
Check "Enable Data Security," and enter the
Access Point's WEP key.
13. Click [Next] - [Finish] to exit out of the profile
setting. Please make sure to exit out of the
network adapter configuration utility so the
settings take effect immediately.
IVIV
IVIV
IV
Ready to Connect:
Some adapters' Configuration Utilities can
store more than one profile. Make sure
the profile you just created is selected as
default.
NOTE
14. The setting is complete. Restart the display, and the computer will now connect to
the display through the Access Point.
This screen is a sample.