Filter
Top Products
Panasonic Wireless Display Configuration Manual
Uninstalling the Software
II
II
I
Uninstalling the Software Keyboard:
1. Close the software keyboard.
2. Select [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]. Select [Soft-
ware Keyboard] - [Add/Remove]. Follow the on-screen instructions.
If [Locked File Detected] is displayed, please select [Reboot].
IIII
IIII
II
Uninstalling the MeiWDS program:
3. Close the MeiWDS program by left clicking on the MeiWDS icon . Select [Exit
MeiWDS].
4. Select [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]. Select [MeiWDS]
- [Add/Remove]. Follow the on-screen instructions.
23
IIIIII
IIIIII
III
Uninstalling the Wireless Display Serial Port driver:
6. Windows 2000
Select [Start] - [Settings] - [Control Panel] - [System] - [Device Manager] - [Ports
(COM&LPT)]. Remove [WDSP COM Port (COMx)].
7.
Windows XP
Select [Start] - [Settings] - [Control Panel] - [System] - [Device Manager] - [Ports
(COM&LPT)]. Remove [WDSP COM Port (COMx)].
Limitation of the Wireless Display Serial Port
When the Wireless Display is not connected to the computer, the serial port of the Wire-
less Display can not be used.
There are some serial devices and applications that will not work. This is because the
serial port of the Wireless Display operates through a virtual serial port.
• Devices or device drivers that start up and carry out port operation confirmation before
connection establishment of the Wireless Display.
For example: - Serial mouse devices
• Non-virtual port applications
For example: - MS-DOS applications
- 16-bit applications
• A modem
• Direct cable connection
In the above cases, the computer may freeze.