Filter
Top Products
Panasonic Wireless Display Configuration Manual
3
AdHoc Mode Configuration
1. Insert the battery into the Wireless Display, connect the
Wireless Display to a power outlet, and turn on the Wire-
less Display.
2. For a Wireless Display that has never been configured
before, the following screen will appear on the display.
If a different screen appears on your display, please
follow step 3 to get to this screen; otherwise, please
skip to step 6.
<Wireless display screen>
Select network type.
AdHoc Infrastructure Cancel
Setup the Wireless Display in AdHoc Mode
II
II
I
Get the Information You Need:
3. Press the MENU button on the Wireless Display. The
following screen is displayed.
Before setting up the Wireless Display with your computer, please make sure
your computer is wireless LAN ready. Meaning that your computer is equipped
with a properly functioning 802.11b wireless network card.
NOTE
CAUTION
If your computer has firewall protection software installed (ie. Black-Ice or
ZoneAlarm), please disable the firewall since it might prevent the Wireless
Display from establishing connection with your computer. Please consult with
your system administrator on how to configure your firewall software.
Power Switch
Menu Button
General Wireless Battery Option Version
Mode : Connect OfflineView
Backlight : LOW MID HIGH
Profile: Profile 1
81%
OK Cancel