Filter
Top Products
161
Relayed Transmission
ADF scanning
When documents are placed on the ADF, the LCD is as
shown to the right.
The document(s) is stored into memory with a file number.
The machine starts to dial the telephone number of the
Relay Station and sends the document(s).
After the Relay Station completes its transmission to the
End Receiving Stations, your machine prints out a RELAY
XMT RESULT REPORT sent back by the Relay Station.
Flatbed scanning
When a book or a document is placed on the Platen Glass,
the LCD is as shown to the right.
Press 1 to select ”YES”. (Pressing 2 returns you to the
previous screen.)
The document is stored into memory with a file number.
Then the machine prompts whether you wish to store
another page.
To store another document into memory, press 1 to select
”YES”. If you do not wish to store an additional document,
press 2 to select ”NO”. (See Note 2)
If ”YES” is selected, the LCD is as shown to the right.
Press START to store the document. Repeat this step
until you have stored all the desired documents.
If ”NO” is selected, the LCD is as shown to the right and the
machine starts to dial the telephone number.
After the Relay Station completes its transmission to the
End Receiving Stations, your machine prints out a RELAY
XMT RESULT REPORT sent back by the Relay Station.
1. You cannot use manual number dialing in step 4.
2. If no action is taken within 60 seconds, the machine will delete the stored pages and return to the standby
mode.
06004000002
06004060035
06004060036
Note:
06004070002
04003070034
#@multitude
* STORE * NO.002
PAGES=01 05%
* STORE * COMPLETED
TOTAL PAGES=05 25%
SCAN FROM FLATBED?
1:YES 2:NO
* STORE * NO.002
PAGES=01 05%
SCAN ANOTHER PAGE?
1:YES 2:NO
SET ANOTHER PAGE AND
THEN PRESS START
* DIALING * NO.002
5551234
6
6a
6b
(1)
(2)