Filter
Top Products
169
Sub-addressing
ADF scanning
When documents are placed on the ADF, the LCD is as
shown to the right.
The document(s) is stored into memory with a file number.
The machine starts to dial the telephone number of the
station and sends the document(s) with Sub-addressing
information.
Flatbed scanning
When a book or a document is placed on the Platen Glass,
the LCD is as shown to the right.
Press 1 to select ”YES”. (Pressing 2 returns you to the
previous screen.)
The document is stored into memory with a file number.
Then the machine prompts whether you wish to store
another page.
To store another document into memory, press 1 to select
”YES”. If you do not wish to store an additional document,
press 2 to select ”NO”. (See Note 4)
If ”YES” is selected, the LCD is as shown to the right.
Press START to store the document. Repeat this step
until you have stored all the desired documents.
If ”NO” is selected, the LCD is as shown to the right and the
machine starts to dial the telephone number of the station
and sends the document(s) with Sub-addressing
information.
1.
FLASH
separates the Sub-address from the Telephone number and is indicated by an ”s” in the
display.
2. Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-addressing Transmission.
3. The Sub-address is not transmitted during Manual Redial Mode.
4. If no action is taken within 60 seconds, the machine will delete the stored pages and return to the standby
mode.
06005000001
06005060009
06005060010
Note:
06005070002
#@multitude
06005070003
06005070004
04003070034
#@multitude
* STORE * NO.001
PAGES=01 01%
* STORE * COMPLETED
TOTAL PAGES=05 25%
SCAN FROM FLATBED?
1:YES 2:NO
* STORE * NO.001
PAGES=01 01%
SCAN ANOTHER PAGE?
1:YES 2:NO
SET ANOTHER PAGE AND
THEN PRESS START
* DIALING * NO.001
5551234
6
5a
5b
(1)
(2)