Filter
Top Products
Customizing Your Machine
190
Fax Parameter Table
056 Cover Sheet *Off Setting the home position of the Cover Sheet parameter in the Select
Mode. (See page 73)
On
077 Department Code *Invalid Selecting whether the machine performs the Department Code
operation. (See page 93)
Valid
078 Rotation XMT Invalid Selecting whether the machine performs rotation transmission.
*Valid
082 Quick Memory XMT Invalid Selecting whether the machine performs Quick Memory Transmission.
Invalid: Stores all documents into memory first before dialing the
telephone number.
Valid: Starts dialing the telephone number immediately after storing
the first page.
*Valid
089 List Output Tray *Upper Selecting the Output Tray home position for List printout.
Upper :The List printout exits to the Upper Output Tray.
Bottom :The List printout exits to the Bottom Output Tray.
Bottom
095 Duplex Print *Invalid Selecting whether the machine performs duplex print.
Valid
097 Special Tray
No.1 - 4
*None Select up to 4 Special Trays that will not be used for printing received
faxes (4-Trays, plus LCT configuration). One Tray must always be
available for receiving Faxes.
(You can specify one Tray (1 ~ 4, LCT) for each selection No. 1, No. 2,
No 3 and/or No. 4)
Tray 1
Tray 2
Tray3
Tray 4
LCT
099 Memory Size
(Flash Memory)
- Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
140 LAN Relay XMT Request *Invalid Selecting whether the machine performs LAN Relay XMT Request.
Valid
141 LAN XMT Reduce *Invalid Selecting whether to automatically reduce from LEDGER / B4 to A4,
when LEDGER / B4 documents are transmitted via LAN.
Invalid: No reduction
Valid: Automatic reduction from LEDGER / B4 to A4
Valid
142
Relay XMT
(a.k.a. LAN Relay Station
on UF-770i)
Invalid Selecting whether the machine accepts and performs G3 relayed
transmission. (Relay Station Functions)
*Valid
143 Relay XMT Report Off Setting how the COMM. Journal for relayed transmission is sent to the
originator.
Off : Don’t send.
Always : Always send.
Inc. only : Send only if communication has failed.
*Always
Inc. only
144 Email Character Set Japanese Selecting the Character Set when receiving or sending email text.
*English
145 Sender Selection *Invalid Selecting a pre-programmed sender’s name and email address before
each transmission.
Valid
* = Factory default setting
No. Parameter Setting Comments