Filter
Top Products
Troubleshooting
207
Information Codes
Problem Solving
NOTE
1. After identifying the problem and verifying the recommended action, if the information Codes
keep reoccuring or for help on Information Codes that appear on your machine but are not
listed above, please contact your local Panasonic Authorized Dealer.
(For mechanical failures, see the Troubleshooting section in the Operating Instructions (For
Copier) page 113)
718 Page Memory Overflow occurred while receiving
printing data. The paper size selected within your
application to print is larger than the paper size loaded
in the cassette(s).
Check the document size and resolution.
Ask originator to re-send in a supported size
and resolution.
--
719 Received data via LAN is in a format that is not
supported.
Ask the originator to re-send with a supported
file attachment format:
* In a TIFF-F format.
* Image data conforming to recording paper
size.
--
720 Cannot connect to the POP Server. (Incorrect POP
Server IP Address) POP Server is down.
Check the POP Server IP Address.
Contact the Network Administrator.
--
721 Cannot connect to the POP Server. (User Name or
Password error)
Check the POP User Name and Password or
the APOP settings.
Contact the Network Administrator.
--
722 Failed to obtain IP address from the DHCP server. Check the 10Base-T/100Base-TX cable
connection.
Confirm that the Internet Parameter and the
DHCP server are correctly configured before
turning on or turning off the power.
Contact the Network Administrator.
13
725 DNS Server connection timed out. DNS Server is
down.
Check the DNS Server IP Address.
Contact the Network Administrator.
--
726 Received an error response from the DNS Server. Check the POP Server Name.
Check the SMTP Server Name.
--
729 Failed to authenticate (SMTP AUTHENTICATION)
when connecting with the SMTP server.
Check the SMTP AUTHENT. User Name and
Password.
Contact the Network Administrator.
192
730 Cannot retrieve the Journal nor program the Internet
Parameters and the Auto Dialer remotely via email
from a PC.
Check that the Fax Parameter No. 158 (PC
REMOTE UPDATE) is set to "2:Valid".
191
731 The dialer buffer for manual dialing was full (70
stations) when the Relay Transmission Request was
received.
Request the originator to re-send the Relay
Transmission Request after the reserved
communication is finished.
--
800/816/
825
Unit was requested to relay a document or
Confidential Communication but has no capability.
Check with the other party. --
815 Mailbox is full. Install Optional Flash Memory Card. --
870 Memory overflow occurred while storing documents
into memory for transmission.
1. Transmit documents without storing into
memory.
2. Install Optional Memory Card.
29
Info.
Code
Meaning Possible Action Page