Filter
Top Products
40
Chapter 2 More Menus Features
Chapter 2
More Menus Features
2-Sided Copy Mode
zFor information on “1 -> 2”, “2 -> 2”, “Book -> 2”, and “N in 1”, refer to the Operating Instructions (For Basic
Operations) of provided booklet.
zThe standard setting of “2-Sided / Original->Copy” can be changed. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) of provided CD-ROM.
zSpecial papers such as cardboard cannot be used for the 2-Sided copy.
Basic Operation for the 2-Sided Copy Mode
1
Place original(s).
zRefer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
zFor “2 -> 1”, “2 -> 2”, “Booklet”, “Multi-Size
Feed”, and “Job Build and SADF”, place
originals on the ADF.
2
Press the Copy key if the machine is
set to other function mode.
3
Select “More Menus”.
4
Select the desired 2-Sided mode.
1 -> 1 : Clears the 2-Sided copy mode.
2 -> 1 : (see page 41)
2 Page : (see page 42)
Booklet : (see page 43)
Multi-Size Feed: (see page 45)
Job Build and SADF: (see pages 47 to 48)
zWhen “Multi-Size Feed” is selected, only
“1 -> 1” can be selected.
For N in 1, 1 -> 2, 2 -> 2, and Book -> 2
Modes
zRefer to the Operating Instructions (For
Basic Operations) of provided booklet.
5
Enter the desired number of copies.
6
Press the Start key.
zWhen copying from the Platen Glass, place
the next original, and follow the instructions
described on the Touch Panel Display.
zAfter finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.