Filter
Top Products
43
Chapter 2 More Menus Features
Continued on the next page...
From 1-Sided Originals to 2-Sided Copies Using Saddle Stitch
(Booklet)
z2-sided original cannot be copied into a booklet.
zOriginals should be placed on the ADF. (5.5" x 8.5" or 8.5" x 11" size is only available, up to 60 originals)
zSaddle stitch binding is possible only when the optional 1Bin Saddle-Stitch Finisher (DA-FS405) is installed.
Ledger (11" x 17"), Legal (8.5" x 14"), and Letter-R (8.5" x 11") are the only applicable paper sizes (legal size
can be selected only when printing from computer).
zThe standard setting for the copy size is the reduced size, however, the setting can be changed to the original
size. Refer to Copier Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM.
z
When the fold position does not match with the center position of the copies, set the binding margin. Refer to
General
Settings
(Key Operator Mode)
in the Operating Instructions (For Function Parameters) of provided CD-ROM.
zStamping can be combined with the Booklet function. For copying with stamp, refer to Copying with Stamping
(see pages 62 to 70).
1
Select “2-Sided / Original->Copy”,
and then select “Booklet”.
zTo display this screen, refer to steps 1 to 3 of
Basic Operation for the 2-Sided Copy
Mode (see page 40).
zWhen “Multi-Size Feed” is selected,
“Booklet” cannot be selected.
2
Select the bind position.
3
Select the cover page type if
necessary.
Select “Cover”.
Select when binding the left
side or the top side of the
page.
Select when binding the
right side or the bottom side
of the page.