Filter
Top Products
57
Chapter 2 More Menus Features
5
Select “XY” to set the same value for X
and Y, or “X” or “Y” to set a different
value for X and Y.
6
Enter the erasing width with “S” and
“T”, or the Keypad, and then select
“OK”.
zThe erasing width can be set in 1 mm
increments from 5 mm to 99 mm.
7
Enter the desired number of copies.
8
Press the Start key.
zWhen copying from the Platen Glass, place
the next original, and follow the instructions
described on the Touch Panel Display. (The
instructions are displayed only when the
Sort mode other than “Non Sort” is
selected.)
zAfter finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.
XY Select to set the same erasing width
for all sides.
X Select to set the erasing width for the
right and left sides.
Y Select to set the erasing width for the
top and bottom sides.