Filter
Top Products
Email Setup
FP Web-Server V2.11
58
"PLC control relay":
The PLC internal relay Rxy is prompted by the FP Web-Server and is set by the PLC in case an
email has to be sent. Rxy is reset by the FP Web-Server after the email has been sent.
If an error occurs, the Rxy+1 is set by the FP Web-Server after the email transmission.
Otherwise the Rxy+1 will be reset.
This setting also has to correspond to the PLC Program (see page
61).
"DT PLC address register":
PLC 16-bit DT Address DTzz: For sending the email, the value (Content) of the storage location
DTzz is read by the FP Web-Server and interpreted as a DT address (Pointer), where the string
(an FPWIN Pro string with a header) with the recipient's email address begins. If the value of the
DTzz lies in the range of 0 to 3, the Recipient's Address defined in the Configurator project is
used.
DTzz+1: For sending an email, the value (Content) of the storage location DTzz+1 is read by
the FP Web-Server and interpreted as a DT address (Pointer), where the string (an FPWIN Pro
string with a header) with the recipient's email address begins. If the value of the DTzz lies in the
range of 0 to 3, the email text defined in the Configurator project is sent (see below).
Data in the FL range cannot be used!
This setting also has to correspond to the PLC program (see page
61).
"Poll time delay":
After the time interval has been predefined (for example every 7 seconds), the FP Web-Server
checks the internal relay PLC Control Relay of the PLC (via MEWTOCOL) to find out if the PLC
wants to send an email.
The "Poll time delay" works in the range of 1 to 60 seconds.
This interval has to agree with the "Server_Timeout" definition in the global variables of the
PLC Program (see page
61).
"Email recipient address: x":
Predefined email address of the recipient No.0 to No.3: With the [Spin] buttons (arrow up/ down)
you can choose among the 4 input fields for the recipient's addresses.
Always enter the predefined email address of the recipient with <> characters!
Umlauts and Japanese characters are not allowed.
A recipient's address can be selected by using the numbers 0 to 3 in the PLC Program (see
page
61).
"Automatic TO and FROM keywords":
With these check boxes are selected, the FP Web-Server automatically inserts the keywords
"To" and "From". For details, please refer to the online help under the keyword "Automatic
TO/FROM tag insertion".
"Email text number: x":
Predefined email texts (see page
59) No.0 to No.3: