Filter
Top Products
9. Programmable Features
63
Note:
L The ECM setting (feature #68 on page 62)
will not be reset.
9.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 59 to
page 62.
1 Press {MENU}.
2 Press {#} and the 2-digit code number.
3 Press the desired direct command to display
the desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
5 To exit programming, press {MENU}.
9.4.1 Program code and direct
command button
{#}{0}{1} Date and time
L Enter the date and time using the dial
keypad. See page 24 for details.
{#}{0}{2} Your logo
L Enter your logo using the dial keypad. See
page 25 for details.
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad.
See page 26 for details.
{#}{0}{4} Sending report
– {1}: “ON”
– {2}: “OFF”
– {3}: “ERROR” (default)
{#}{0}{6} FAX ring count
– {2}: “2” (default)
– {3}: “3”
– {4}: “4”
– {5}: “5”
– {6}: “6”
– {7}: “7”
– {8}: “8”
– {9}: “9”
{#}{0}{6} TAM ring count
– {2}: “2” (default)
– {3}: “3”
– {4}: “4”
– {5}: “TOLL SAVER”
FC238HK-PFQX2217ZA_en.book Page 63 Wednesday, July 27, 2005 11:02 AM