Filter
Top Products
4. Telephone
28
2. Select “Voice Enhancer”, then press {>}.
3. Select the desired setting, then press {>}.
Note:
L If you select “High Tone” or “Low Tone”,
“[VE]” is displayed.
Mute
You can mute your voice during a conversation.
While mute is turned ON, you will be able to hear
the other party, but the other party will not be
able to hear you.
1. To mute your voice, press {C/T}.
2. To return to the conversation, press {C/T}
again.
Key lock
The handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
while key lock is ON. Emergency calls (page 71)
cannot be made until key lock is turned OFF.
To turn key lock ON, press {j/OK} for about 2
seconds.
L “[X]” is displayed.
To turn key lock OFF, press {j/OK} for about
2 seconds.
Note:
L Key lock is turned OFF when the handset is
turned OFF.
4.1.2 With the base unit
1 Press {DIGITAL SP-PHONE}.
2 Dial the telephone number.
3 When finished talking, press {DIGITAL SP-
PHONE}.
Speakerphone operation
For best performance, please note the following:
– Use the speakerphone in a quiet
environment.
– Speak alternately with the caller.
– If you or the other party have difficulty
hearing each other, press {A} or {B}
repeatedly to adjust the speaker volume as
necessary.
To redial the last number dialled from the
base unit
Press {DIGITAL SP-PHONE}, then press
{REDIAL}.
To redial automatically
Press {DIGITAL SP-PHONE}, then press
{REDIAL}.
L If the line is busy, the unit will automatically
redial the number up to 9 times. While the
base unit is redialling, mute is automatically
turned ON.
Note:
L If mute does not turn OFF after the line is
connected, press {MUTE}.
{A}{B}
{MUTE}
{REDIAL}
{DIGITAL SP-PHONE}
FC238HK-PFQX2217ZA_en.book Page 28 Wednesday, July 27, 2005 11:02 AM