Filter
Top Products
3. Preparation
19
3 PreparationConnections and Setup
3.1 Connections
Important:
L The unit will not function when there is a
power failure. To make calls in emergency
situations, you should connect a
telephone that can function during a
power failure to the telephone line.
Caution:
L After connection, you must charge the
batteries to make or answer calls with the
handset (page 20).
L When you operate this product, the power
outlet should be near the product and
easily accessible.
L Be sure to use the telephone line cord
included in this unit.
L Do not extend the telephone line cord.
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the
network condition of the device.
L If you use the unit with a computer and your
internet provider instructs you to install a filter
(3), please connect the telephone line cord
as follows.
1 Power cord
L Connect to the power outlet
(220 V – 240 V, 50/60 Hz).
2 Telephone line cord
L Connect to a single telephone line jack.
2
1
3
FC238HK-PFQX2217ZA_en.book Page 19 Wednesday, July 27, 2005 11:02 AM