Filter
Top Products
1. Introduction and Installation
13
7 Lift open the front cover (1), holding OPEN
(2).
L If the lower glass (3) is dirty, clean it with
a soft and dry cloth.
8 Install the drum and toner unit (1) by holding
the tabs.
L Do not touch the transfer roller (2).
9 Close the front cover (1) by pushing down
on both sides, until locked.
L While the unit displays “PLEASE WAIT”,
do not open the front cover, or disconnect
the power cord.
Toner save feature
If you want to reduce toner consumption, set the
toner save setting to ON (feature #79 on page
44). The toner cartridge will last approximately
40 % longer. This feature may lower the print
quality.
1.6 Paper tray and paper
tray cover
1 Insert the paper tray (1) into the slot (2) on
the back of the unit.
1
2
3
1
2
1
2
1
FL611AL-PFQX2169ZA-en.book Page 13 Thursday, February 24, 2005 11:37 AM