Filter
Top Products
4. Fax
34
4.6 Receiving a fax
manually – Auto answer
OFF
4.6.1 Activating TEL mode
Set the fax machine to TEL mode by pressing
{AUTO ANSWER} repeatedly to display the
following.
TEL MODE
L The {AUTO ANSWER} light is OFF.
How to receive phone calls and faxes
1. Lift the handset to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {FAX START}.
CONNECTING.....
3. Replace the handset.
L The unit will start fax reception.
L If you do not answer the call within 10
rings, the unit will temporarily switch to fax
reception. The other party can then send
a fax.
To stop receiving
Press {STOP}.
How to receive faxes with an extension
telephone
If you have another telephone connected to the
same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*} {#} {9} (default fax activation
code) firmly.
L The fax machine will start reception.
3. Replace the handset.
Note:
L To receive fax documents using the
extension telephone, make sure remote fax
activation is turned ON (feature #41 on page
43) beforehand. The default setting is ON.
{FAX START}
{STOP}
FL611AL-PFQX2169ZA-en.book Page 34 Thursday, February 24, 2005 11:37 AM