Filter
Top Products
Setup
-22-
Date and time, your logo and fax number
You should program the date and time,
your logo and fax number.
This information will be printed on each
page transmitted from your unit.
Setting the date and time
1 Press {MENU}.
SYSTEM SET UP
2 Press {SET}.
PRESS[()]&[SET]
3 Press {<} or {>} until the following is
displayed.
SET DATE & TIME
4 Press {SET}.
Example: M:01/D:01/Y:02
L The underbar shows a position of
the cursor.
5 Enter the correct month/day/year by
selecting 2 digits for each, using the
dial keypad.
Example: August 10, 2002
Press {0}{8} {1}{0} {0}{2}.
M:08/D:10/Y:02
6 Press {SET}.
Example: TIME: 12:00AM
7 Enter the correct hour/minute by
selecting 2 digits for each, using the
dial keypad. Press {*} to select “AM”
or “PM”.
Example: 3:15 PM
1. Press {0}{3} {1}{5}.
TIME: 03:15AM
2. Press {*} until “PM” is displayed.
TIME: 03:15PM
8 Press {SET}.
L The next feature will be displayed.
9 Press {MENU}.
Note:
L You can enter the number by pressing
{+} or {-} in steps 5 and 7. In this case,
press {>} to move the cursor.
L The accuracy of the clock is
approximately ±60 seconds a month.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
{SET}
{MENU}
{+} {-} {<} {>}
FT74-78HK.book Page 22 Friday, June 28, 2002 9:45 AM