Filter
Top Products
Features Summary
-69-
Programma ble Feat ures
Programming
The unit provides various programming
features.
General programming
method
1 Press {MENU}.
SYSTEM SET UP
2 Press {SET}.
PRESS[()]&[SET]
3 Select the feature you wish to program.
For basic features
Press {<} or {>} until the desired
feature is displayed.
For advanced features
1. Press {<} or {>} until the following
is displayed:
ADVANCED MODE
2. Press {SET}.
3. Press {<} or {>} until the desired
feature is displayed.
4 Press {SET}.
L The current setting of the feature will
be displayed.
5 Press {+} or {-} until the desired
setting is displayed.
L This step may be slightly different
depending on the feature.
6 Press {SET}.
L The setting you selected is set, and
the next feature will be displayed.
7 To exit programming, press {MENU}.
Programming by entering the
program code number directly
You can select a feature by directly entering
the program code (# and 2-digit number)
instead of using {<} or {>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code number.
3. Follow steps 4 to 7 in this page.
To cancel programming
Press {MENU} to exit the program.
{MENU}
{SET}
{+} {-} {<} {>}
FT74-78HK.book Page 69 Friday, June 28, 2002 9:45 AM