Filter
Top Products
Remote Operation (KX-FT78 only)
-66-
Skipping the greeting message
Press {0} during the greeting message
playback.
L The unit will skip the rest of the greeting
message.
Turning the message transfer on or off
You must program a transfer telephone
number beforehand (feature #60 on page
74).
Press {8}{1} to turn on the message
transfer.
Press {8}{2} to turn off the message
transfer.
L If a transfer telephone number is not
programmed, you cannot turn this
feature on. 6 beeps will sound.
Turning the pager call on or off
You must program a pager number
beforehand (feature #70 on page 54).
Press {8}{3} to turn on the pager call.
Press {8}{4} to turn off the pager call.
L If a pager number is not programmed,
you cannot turn this feature on. 6 beeps
will sound.
Changing the receive mode
Press {8}{0} to change the receive mode
from TAD/FAX to TEL.
L You cannot return to TAD/FAX mode in
the same call. To return to TAD/FAX
mode, see the following.
Setting to TAD/FAX mode from TEL
mode
1. Call your unit and wait for 15 rings.
L The answering device will temporarily
answer the call.
2. Enter the remote operation ID during the
greeting message.
L A long beep will sound, and your unit
will switch to TAD/FAX mode.
3. Hang up the handset.
FT74-78HK.book Page 66 Friday, June 28, 2002 9:45 AM