Filter
Top Products
Sending Faxes
-41-
Broadcast transmission (KX-FT78 only)
This feature is useful for sending the same
document to selected parties whose fax
numbers are stored in the directory (up to
10 entries). Before programming, make
sure that the desired stations have been
stored in the directory (page 27).
1 Insert the document FACE DOWN.
L If necessary, press {+} or {-}
repeatedly to select the desired
resolution (page 37).
2 Press {BROADCAST} until the
following is displayed.
ENTRY BROAD
3 Press {SET}.
DIR= [00]
4 Press {+} or {-} until the desired
name is displayed.
Example: Bill [±]
5 Press {SET}.
Example: DIR=Bill [01]
L To program other stations, repeat
steps 4 and 5 (up to 10 entries).
6 Press {FAX/START} after
programming all of the desired entries.
L The document will be fed into the
unit and scanned into memory. The
unit will then transmit the data to
each entry, calling each number
sequentially.
L After transmission, the stored
document will be erased
automatically, and the unit will
automatically print a broadcast
sending report.
Note:
L The record of the selected parties will be
saved. To send to the same parties, see
page 42.
L If you select the “FINE”, “SUPER FINE”
or “PHOTO” resolution, the number of
pages that the unit can transmit will
decrease.
L If the document exceeds the memory
capacity, sending will be cancelled.
L If one of the entries is busy or does not
answer, it will be skipped. All skipped
entries will be redialled up 5 times after
all of the other entries have been called.
FACE DOWN
{STOP}
{FAX/START}
{BROADCAST}
{SET}
{+} {-}
FT74-78HK.book Page 41 Friday, June 28, 2002 9:45 AM