Panasonic KX-TDA100 Network Router User Manual


 
2.2 Installation of the Hybrid IP-PBX
62 Installation Manual
2.2.11 Wall Mounting (KX-TDA200)
CAUTION
Make sure that the wall the shelf will be attached to is capable of supporting at least 4 times the
weight of the shelf.
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire laths or
metal plates in the wall.
Notes
Do not block the openings of the shelf. Allow space of at least 20 cm above and 10 cm at the sides
of the shelf.
Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on
the back of the shelf will not be blocked.
Make sure that the surface behind the shelf is not made of wood.
Be careful not to drop the shelf.
1. Install 4 anchor plugs in the wall, using the metal bracket as a template. Fix the metal bracket with 4
screws (A).
30 mm
8 mm
Anchor Plug
Metal Bracket
Wall
Screw (A)
Screw (A)
Metal Bracket
Hammer
Anchor Plug