Filter
Top Products
Installation
15
For assistance, please call: 1-800-272-7033
“
Connecting the KX-HGW200 to a Home Network
To connect computers using the HomePNA:
1
Make sure the computer is turned off.
2
Connect the telephone line cord (included accessory) to the LINE jack
on the KX-HGW200.
Connect the other end of the telephone line cord to the wall mounted
single-line telephone jack.
Note:
For using HomePNA:
≥A HomePNA card and software have to be installed properly on the
computer first.
≥To avoid interference with the HomePNA signals, do not use an
ADSL filter, which may have been provided by your phone company,
on the telephone line or on the line that runs in between the
telephone jack and computer. If you have two lines installed and one
of them is dedicated to phone use, you can use the ADSL filter on
that phone line only.
≥Use the telephone line that does not have the ADSL filter for your
HomePNA connection.
Single-line
telephone jack
(RJ11C)
LINE jack
Telephone line
cord
(included accessory)
LINE
To RJ-45 jack
on the cable/xDSL
modem
(Continued “)
PQQX12817ZA \1-P29 01.3.8 3:17 PM y[W 15