Filter
Top Products
Installation
29
For assistance, please call: 1-800-272-7033
Internet Configuration and Confirmation
Internet Configuration
Some carriers or ISPs (Internet Service Providers) require you to enter the
parameters for your Internet connection. These parameters should be
collected and noted using the following Quick Prep Sheet or by using the
steps on pages 20–26. In this case, set the parameters to the KX-HGW200
first, and then confirm the setup. The parameters can be entered in the
Basic Setup web screen of the KX-HGW200. Follow the steps below (1-4)
and enter the parameters.
1: Access the KX-HGW200 administration web screen following the steps
on p. 27 and 28.
2: Make the Basic Setup screen appear by clicking the [Basic\Setup] on
the KX-HGW200 administration top page.
3: Enter the parameters following the steps on p. 31.
4: When you have finished, restart the computers.
Confirmation
After you have confirmed the connection between the computer and the
KX-HGW200, and set up your Internet connection parameters, confirmation
of the connection between the Internet and the KX-HGW200 is needed.
If you can access a WWW (World Wide Web) site, your home network has
been successfully linked to the Internet.
1
On the computer, start up your web browser.
2
Enter the address of a web site in the address field (URL line) of your
web browser and press the Enter key on your computer.
A WWW site appears.
If a web site does not appear:
1: Make sure the address of the web site has been correctly entered in
the address field (URL line) of the web browser.
2: Make sure that “Confirmation of the Home Network Setup” on p. 27
is successfully made.
3: Make sure the connection between the KX-HGW200 and the
cable/xDSL modem is successfully made.
4: Make sure that the computers, the KX-HGW200, cable/xDSL
modem and other devices in the home network have been turned
on in proper order. See “Turning on the Devices” on p. 19 for more
detailed information.
5: Confirm the information on your Internet connection provided by
your ISP. If you are required to enter some parameters, see “Basic
Setup” on p. 31 and set the parameters to the KX-HGW200.
PQQX12817ZA \1-P29 01.3.8 3:18 PM y[W 29