Filter
Top Products
34
“
Setting Up the Parameters
≥IP Address
≥Netmask
Enter the local IP address of the KX-HGW200 in this data field.
The default parameter is “192.168.0.254”.
If you change this IP address, change the gateway address in
each computer (p. 53 or 55) and change the proxy server setting
of the web browser (p. 47 or 49) in each computer if necessary.
The IP address must be set out of the Available Address Range.
Enter the netmask of the local IP address of the KX-HGW200 in
this data field. The default parameter is “255.255.255.0”.
Instructions for the data fields
IP Address (Home side)
IP Masquerade
DHCP Server
≥Always connected
≥Automatic
≥Manual
Disconnection on
Idle
The PPPoE connection is online as long as the KX-HGW200 is
turned on. This is the default setting.
The PPPoE connection is online only when data is being sent to
the Internet from a computer in the home network. This function
allows you to initiate/stop the PPPoE connection on the PPPoE
connection screen, as the Manual setting does. For more details,
see p. 41.
The PPPoE connection is online only when you click [Connect]
on the PPPoE connection screen. To stop the PPPoE connection,
click [Disconnect] on the PPPoE connection screen. For more
details, see p. 41.
If enabled, the KX-HGW200 detects when the PPPoE connection
is idle and will automatically disconnect it when the length of idle
time exceeds the user-specified limit.
When you use this function, check “Enabled” and specify the time
(1–99 minute).
When “Always connected” is selected, the timer does not work.
≥DHCP Server
≥Available Address
Range
This function enables the KX-HGW200 to assign a local IP
address automatically to a device in the home network. The
default setting of the KX-HGW200 is “Use”. To set up the
KX-HGW200 for a static IP network, click “Do Not Use” check box.
If you change the DHCP server setting, set the IP address in the
each computer. (See p. 52 or 55.)
When the DHCP server function of the KX-HGW200 is used, enter
the extent of the assigned local IP addresses in this data field, up
to 32 addresses.
≥IP Masquerade This function translates local addresses on the home network into
one IP address. The default setting of the KX-HGW200 is “Use”.
PPPoE Connection
When a PPPoE connection is used to connect to the ISP, you can select how to initiate/stop the
PPPoE connection. First, select how to connect from the Connect. If your payment plan with
your ISP does not include unlimited Internet access and you are charged, instead, according to
your usage, it is recommended that you select “Automatic” or “Manual”.
PQQX12817ZA P30-45 01.3.8 3:20 PM y[W 34