Panasonic UF-770 All in One Printer User Manual


 
CONTRAST
HALFTONE
V
Control Panel
Used to set Normal, Lighter, or Darker. (see
page 41) Also serves as an arrow key (<) to
move the cursor over recorded numbers and
characters.
Provides OFF, QUALITY or FAST settings
for halftone documents. (see page 42)
Also used for the following
Search station name for Directory
Seamh Dialling
Confirm entered station for multi-station
communication.
Select functions.
RESOLUTION Used to set Standard, Fine, Super-Fine.
(see page 41) Also serves as an arrow key
> (>) to move the cursor over recorded
numbers and characters.
STAMP
^
Used to turn the verification stamp ON or
OFF. (see page 42)
Also used for the following
Search station name for Directory
Search Dialling
,,Confirm entered station for multi-station
communication.
Select functions.
1
MEMORY
Used to select either memory or direct FUNCTION
communication. I---"--'1
(see page 44 to 54)
DIRECTORY
SEARCH
I Used to start or select the function and
sub-functions. These functions are
explained in detail on the next page.
qUsedto searchfor a stationname
(see page 49 and 54)
PAUSE/
REDIAL
SPACE
ABBR
SUB-ADDR
FLASH
Used to enter a pause when recording or - --VOL
dialling a telephone number, or to redial the CLEAR
last dialed number. (see page 59)
Usedto start Abbreviated Dialling. VOL-- +
(see page 48 and 53) SET
Used to access some features of your PBX. MONITOR
Used to erase the previously entered input.
Also used to adjust the monitor and ringer
volume. (see page 24)
Used to set operations. Also used to adjust
the monitor and ringer volume.
(see page 24)
Used to start On-Hook Dialling or to make
voice contact request.
(see page 56)
@@®
@@@
@®@
@®®
Used for Manual Number Dialling,
recording phone numbers, and selecting
functions.
Used to temporarily change Dialling Mode
to Tone when Pulse mode isset.
I Used to confirm current communication
modes (e.g. Page number, ID, Dialed
Telephone number, File number) when unit
_d isON LINE.
@
@
@
Used to cancel operations. When it is
pressed, the mach ne will return to standby.
Used to make copies.
(see page 64)
Used to start operations.
11