Filter
Top Products
Sending Documents
Direct Transmission
If your machine's memory is full or you wish to send the document real time, use Direct Transmission.
Manual Number Dialling (Direct Transmission)
To dLal the telephone number manually, follow the steps below.
_ Set document(s) face down,
4
ENTER STATION (S) I
THEN PRESS START 00%_
2° f , i
MEMORY ENTER STATION
Make sure that the lamp goes off. oo%
Enter a telephone number from the keypad.
Ex,®®®<D®®®
{p_ss sTARTToD_
_5s1:341 (
_ I* DI_z,IN_ *
[ ss1234 i
Your machine starts to dial the telephone number.
_] Note: 1.If you need a special access number to get an outside line, dial it firstthen press _ to enter a
pause (represented by a "--") before dialling the full number.
EX: 9 PAUSE 5551234
2. ff you are using Pulse dialling and you wish to change toTone dialling in the middle of dialling, press
(represented by a 7").
The dialling mode will be changed from Pulse to Tone after dialling the digit "/".
Ex: 9 PAUSE TONE 5551234
3. To stop the transmission, press _ .
The display shows:
ICOMMONICATION STOP ?i
l:YES 2:NO
ii llml iiiiii
Press _ to stop the transmission. The Communication Journal will not print out regardless of the
printout mode setting of the Communication Journal.
51