Filter
Top Products
Basic Transmission Settings
Halftone
The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is
preset to HALFTONE = Off. You can select either Fast mode or Quality mode.
Press__ HALFTONE l to:
FAST r'_ FAST _ ID:_ FAST
\ ] /
QUALITY -t{ QUALITY _ QUALITY
HALFTONE _I-_ALFTONE HALFTONE
HALFTONE= Off HALFTONE=Quality HALFTONE = Fast
F_ Note: When youse/ectHALFTONE, FASTorQUALITY, yourmachinewillautomatical/ysetectFineResolution.
Verification Stamp
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small _) mark.
Press _ to:
STAMP= Off STAMP= On
[]Note:
1. When you store a document in memory,, the Verification Stamp wil/ stamp on the document ff ff is
successfully stored in memory. In this case the Verification Stamp is not a confirmation that the
document was successfully transmitted, ff you wishto disable the use of the Verification Stamp when
storing document in memory, change the setting of Fax Parameter No. 28, see page 36.
2. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04, see
page 35.
42