Filter
Top Products
Controls and Features (cont.)
Bottom Surface
Air intake area (filter)
Air is taken in through this area to cool the light-source
lamp. If this area is blocked or if something that obstructs
taking in or exhausting air is placed around the projector,
heat may build up inside and could cause a fire. For details,
refer to “Precautions for Installation” on page 17.
Opening for replacing the light-source lamp
For replacing the light-source lamp, refer to “Replacing the
Light-Source Lamp” on page 50.
Fixing foot
Be careful as paper, cloth or soft cushion could be drawn in
if placed nearby Do not block the intake area, or heat may
build up and could cause a fire.
Clean the filter periodically. For details, refer to ‘Cleaning and
Replacing the Filter” on page 53.
Deposition of dirt on the filter works to reduce the cooling
effect, causing heat to build up inside, which could cause a
fire or malfunction.
10